Liming Heavy Industry CS Cone Crusher is designed according to customers’ requirement, it is a high efficiency spring cone crusher absorbing advanced technology at home and abroad. CS Cone Crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depend upon the size of feed and fineness of the crushed product.
Working principle:
1. High-performance: Combining optimal designing of chamber type with applying reasonable speed and stroke, to make this kind of machine does more work with the same dynamic cone diameter. Therefore, this machine is of high-performance and manufacturing capacity compared with other cone crusher of the same type.
2. Good products size composition: the crusher applies for laminated crushing principle to make cubic shapes of final products stand for larger proportion. Acicular and flake shape products decrease and size fraction much more well-proportioned.
3. Good stability: if there is metal or other non-broken material come to the chamber, metal going through protection device will release it and then reset automatically. The protection device has fixed discharge opening returning point and the original discharge opening can returning back immediately after the metal goes through the crushing chamber.
4. Easy maintenance and operation: all parts can be disassembled from top and the upper side, so that fixed cone and dynamic cone can be disassembled easily.
5. Low production costs: Due for big capacity, high reliability and easy maintenance, the production costs has been reduced greatly.
Technical Parameter :
Mm to inch conversion: 25.4millimeters=1 inch
Note: the capacity is based on limestone, it also will be affected by hardness, humidity,method and operation,final product distribution of material.
Standard
Model | Dia. mm (inch) | Cavity | Feed Opening | Outlet Setting (mm) | Shaft Speed (r/min) | Power (kw) | Capacity (t/h) | Weight (t) | Dimension (mm) | |
Closing Side (mm) | Open Side (mm) | |||||||||
CSB75 | 900 (3′) | Fine | 83 | 102 | 9-22 | 580 | 75 | 45-91 | 15 | 2821×1880×2164 |
Coarse | 159 | 175 | 13-38 | 59-163 | ||||||
CSB160 | 1295 (4 1/4′) | Fine | 109 | 137 | 13-31 | 485 | 160 | 109-181 | 27 | 2800×2342×2668 |
Medium | 188 | 210 | 16-38 | 132-253 | ||||||
Coarse | 216 | 241 | 19-51 | 172-349 | ||||||
CSB240 | 1650 (5 1/2′) | Fine | 188 | 209 | 16-38 | 485 | 220 | 181-327 | 55 | 3911×2870×3771 |
Medium | 213 | 241 | 22-51 | 258-417 | ||||||
Coarse | 241 | 268 | 25-64 | 299-635 | ||||||
CSB315 | 2134 (7′) | Fine | 253 | 278 | 19-38 | 435 | 315 | 381-726 | 110 | 4613×3251×4732 |
Medium | 303 | 334 | 25-51 | 608-998 | ||||||
Coarse | 334 | 369 | 31-64 | 789-1270 |
Short Head
Model | Dia. mm (inch) | Cavity | Feed Opening | Outlet Setting (mm) | Shaft Speed (r/min) | Power (kw) | Capacity (t/hour) | Weight (t) | Dimension (mm) | |
Closing Side (mm) | Open Side (mm) | |||||||||
CSD75 | 914 (3′) | Fine | 13 | 41 | 3-13 | 580 | 75 | 27-90 | 15 | 2821×1880×2410 |
Coarse | 33 | 60 | 3-16 | 27-100 | ||||||
CSD160 | 1295 (4 1/4′) | Fine | 29 | 64 | 3-16 | 485 | 160 | 36-163 | 27 | 2800×2342×2668 |
Medium | 54 | 89 | 6-16 | 82-163 | ||||||
Coarse | 70 | 105 | 10-25 | 109-227 | ||||||
CSD240 | 1676 (5 1/2′) | Fine | 35 | 70 | 5-13 | 485 | 220 | 90-209 | 55 | 3917×2870×3771 |
Medium | 54 | 89 | 6-19 | 136-281 | ||||||
Coarse | 98 | 133 | 10-25 | 190-336 | ||||||
CSD315 | 2134 (7′) | Fine | 51 | 105 | 5-16 | 435 | 315 | 190-408 | 110 | 4130×3251×4454 |
Medium | 95 | 133 | 10-19 | 354-508 | ||||||
Coarse | 127 | 178 | 13-25 | 454-599 |
Note: Any change of CS Cone Crusher technical data shall not be advised additionally.