Micro Powder Mill

Micro Powder Mill is a new type of  grinding mill for making super fine powder through more than 20 times of test and improvement. The fineness of which can reach to 0.006mm, it is mainly used for processing gypsum, calcspar, talc, and other materials used in painting, pigment and cosmetics industry. Compared with jet mill, It is economic-cost, high-capacity, and the spare parts just need to exchange once a year; The bag filter is added to protect the environment.

Features:

1.Low investment cost. With same fineness and motor power, it invest less comparing with stirring mill, ball mill, which is of low cost, short recovery period and twice more production capacity.
2.High powder outlet ratio. With same product fineness and energy consumption, capacity is 45% higher comparing with airflow mill and stirring mill.
3.Less loss of wearable parts, long life span. All wearable parts are of high-quality abrasion resistant materials both at home and abroad, which has longer life span than ordinary mill, generally more than one year.
4.High security and reliability, running safely and stably in the grinding cavity. Comparing with ordinary mill, the super fine mill has advantages of no rolling draft, no bolts. Thus, there is no problem of weariness of drafts and other seal parts, which can avoid bolts loosing and machine damage.
5.High fineness of final product. Final fineness can reach d97≤5μm in one time.
6.Environmental and less pollution. High efficient pulse dust removing device is adopted, which can guarantee little dust pollution of the whole set of equipment. Muffler and silencer room are allocated, which will reduce dust pollution and noise and meet the national environment protection standard, and protect the surrounding environment.

Technical Data :

Mm to inch conversion: 25.4millimeters=1 inch
The humidity and hardness of raw material will affect the fineness and capacity.

Model HGM80 HGM100
Roller number 21 27
Diameter (mm) Φ800 Φ1000
Ring number 3 3
Main unit speed(mm) 180-235 150-200
Max. feeding size(mm) <10 <10
Final size (mesh) 300-3000 300-3000
Capacity (kg/h) 500-3500 900-6500
Overall dimension (m) 12.4×3.5×5.8 14.5×5.0×8.6

Note: Any change of Micro Powder Mill technical data shall not be advised additionally.