The PE series of European jaw crushers have been developed on basis of many years proven experience and can be used for secondary and fine crushing to process hard and abrasion mineral stones and rocks in metallurgy, mine, chemical, cement, building construction, fireproof material and ceramics industry. PE Series Jaw Crusher is ideal crusher to crush the mineral stone, rock and slag with compression resistance below 320Mpa.
Features:
1. World-level manufacturing technology is adopted, and highest-level raw material is used.
2. More advanced movable jaw assembly lengthens life of crusher.
Movable jaw assembly is made from cast piece with high-quality, is driven by two large flying wheels which are made from cast steel. Moreover, heavy eccentric shaft is processed by forged mold. These entire make the PE series jaw crusher extremely reliable.
3. Integral cast steel structure is adopted for bearing seat. Integral cast steel bearing matches well with the crusher frame, at the same time, radial strength of the bearing seat is highly strengthened.
4. Finite element analysis technology is adopted to make the crusher much stronger.
5. Crusher chamber adopts “V” structure which could make actual feed width comply with the nominal one.
6. Adjustment of the discharge part is more convenient.
The adjustment methods: gasket adjustment, hydraulic assistant adjustment, wedge block and wedge hydraulic adjustment.
7. Bearing with larger model and higher load are used.
All PE jaw crusher is equipped with larger bearing compared with same model of normal jaw crusher. Its higher load capacity and effective oil seal will lengthen the life of bearing.
8. A newly designed tooth-shape side plate, makes the available area of jaw plate longer, and enhances the capacity.
Technical Data:
Model | JC760×1100 | JC840×1100 | JC1100×1200 | JC180×1300 | JC250×1000 | JC250×1300 | JC400×600 | |
Opening Size (mm) |
760×1100 | 840×1100 | 1100×1200 | 180×1300 | 250×1000 | 250×1300 | 400×600 | |
Max. Feed Size (mm) |
620 | 720 | 930 | 150 | 220 | 220 | 350 | |
Discharge Opening Range (mm) |
75-200 | 100-225 | 150-275 | 10-30 | 20-40 | 70-100 | 35-85 | |
Shaft Speed (r/min) |
270 | 240 | 210 | 320 | 330 | 290 | 250 | |
Capacity (t/h) | 150-350 | 200-500 | 300-650 | 12-35 | 15-50 | 26-85 | 15-70 | |
Motor | Power (kw) |
110-132 | 132-160 | 185-200 | 30-37 | 30-37 | 37-45 | 37-45 |
Speed (r/min) |
985 | 985 | 740 | 980 | 980 | 980 | 980 | |
Dimension (mm)(L×W×H) |
2600×2500 ×2200 |
3300×2320 ×3120 |
4140×2660 ×3560 |
1320×2150 ×1175 |
1400×1850 ×1310 |
1450×2150 ×1175 |
1920×1460 ×1840 |
|
Weight (kg) | 24000 | 32000 | 59200 | 6000 | 5600 | 6800 | 7000 |
Note: Any change of European Type Jaw Crusher technical data shall not be advised additionally.