Blog Archives

CS Cone Crusher

kefidchina | July 14th, 2012

Kefid CS Cone Crusher is designed according to customers’ requirement, it is a high efficiency spring cone crusher absorbing advanced technology at home and abroad. CS Cone Crusher made plaster stone and engine oil separated, assured reliable performance. The type of crushing chamber depend upon the size of feed and fineness of the crushed product.

Working principle:

1. High-performance: Combining optimal designing of chamber type with applying reasonable speed and stroke, to make this kind of machine does more work with the same dynamic cone diameter. Therefore, this machine is of high-performance and manufacturing capacity compared with other cone crusher of the same type.
2. Good products size composition: the crusher applies for laminated crushing principle to make cubic shapes of final products stand for larger proportion. Acicular and flake shape products decrease and size fraction much more well-proportioned.
3. Good stability: if there is metal or other non-broken material come to the chamber, metal going through protection device will release it and then reset automatically. The protection device has fixed discharge opening returning point and the original discharge opening can returning back immediately after the metal goes through the crushing chamber.
4. Easy maintenance and operation: all parts can be disassembled from top and the upper side, so that fixed cone and dynamic cone can be disassembled easily.
5. Low production costs: Due for big capacity, high reliability and easy maintenance, the production costs has been reduced greatly.

Technical Parameter :

Mm to inch conversion: 25.4millimeters=1 inch
Note: the capacity is based on limestone, it also will be affected by hardness, humidity,method and operation,final product distribution of material.

Standard

Model	Dia. mm (inch)	Cavity	Feed Opening		Outlet Setting (mm)	Shaft Speed (r/min)	Power (kw)	Capacity (t/h)	Weight (t)	Dimension (mm)
			Closing Side (mm)	Open Side (mm)
CSB75	900 (3′)	Fine	83	102	9-22	580	75	45-91	15	2821×1880×2164
		Coarse	159	175	13-38			59-163
CSB160	1295 (4 1/4′)	Fine	109	137	13-31	485	160	109-181	27	2800×2342×2668
		Medium	188	210	16-38			132-253
		Coarse	216	241	19-51			172-349
CSB240	1650 (5 1/2′)	Fine	188	209	16-38	485	220	181-327	55	3911×2870×3771
		Medium	213	241	22-51			258-417
		Coarse	241	268	25-64			299-635
CSB315	2134 (7′)	Fine	253	278	19-38	435	315	381-726	110	4613×3251×4732
		Medium	303	334	25-51			608-998
		Coarse	334	369	31-64			789-1270

Short Head

Model	Dia. mm (inch)	Cavity	Feed Opening		Outlet Setting (mm)	Shaft Speed (r/min)	Power (kw)	Capacity (t/hour)	Weight (t)	Dimension (mm)
			Closing Side (mm)	Open Side (mm)
CSD75	914 (3′)	Fine	13	41	3-13	580	75	27-90	15	2821×1880×2410
		Coarse	33	60	3-16			27-100
CSD160	1295 (4 1/4′)	Fine	29	64	3-16	485	160	36-163	27	2800×2342×2668
		Medium	54	89	6-16			82-163
		Coarse	70	105	10-25			109-227
CSD240	1676 (5 1/2′)	Fine	35	70	5-13	485	220	90-209	55	3917×2870×3771
		Medium	54	89	6-19			136-281
		Coarse	98	133	10-25			190-336
CSD315	2134 (7′)	Fine	51	105	5-16	435	315	190-408	110	4130×3251×4454
		Medium	95	133	10-19			354-508
		Coarse	127	178	13-25			454-599

Note: Any change of CS Cone Crusher technical data shall not be advised additionally.

Category: Cone Crusher

TAGcone crusher , CS cone crusher , Spring Cone Crusher , stone crusher

HP Cone Crusher

kefidchina | July 14th, 2012

HP cone crusher is a new type of hydraulic cone crusher developed from the latest hydraulic technology. This cone crusher is widely used in metal and nonmetal mines mining, cement processing, sand making and metallurgical industries.

HP cone crusher not only improves the production capacity and crushing efficiency, but also widens the applying area, the hardness of materials range from limestone to basalt. It has a second-to-none crushing performance in the work of medium-size crushing, fine crushing and super fine crushing. The HP cone crusher is the improved type of spring cone crusher and can be used to replace ordinary hydraulic cone crusher in the line of mining and construction. It is the ideal equipment for large stone crushing factory and mining industry.

Features:

1. High-efficiency: The machine uses optimized structure such as, fixed axis, small spherical bearing, which make the efficiency is 5%-15% higher than the efficiency of traditional cone crusher.
2. Large capacity: The perfect combination of broken stroke, broken speed and crushing chamber makes the capacity is 35%-65% larger than the capacity of traditional cone crusher under the same broken cone size.
3. High quality stone: The machine uses special laminated crushing principle resulting in the crushing effect of particles, so that the proportion of cube in the output clearly increased, the flake stone needless reduced and the grain size more uniform.
4. More smoothly operation: When iron and other hard objects that cannot be broken into the machine, the over iron protection equipment will released the objects and then reset immediately.
5. Multi-split hydraulic lubrication control system can ensure the double protection of the bush and overload protection.

Technical Parameter :

Mm to inch conversion: 25.4millimeters=1 inch

Type	Cavity (coarse/fine)	Min. discharge size (mm)	Feed size (mm)	Capacity (t/h)	Power (kW)	Weight (t)	movable cone diameter (mm)
HP-200	C	13	150	120-240	160	13	950
HP-200	F	6	76	55-180	160	13	950
HP-300	C	13	225	150-430	220	18	1160
HP-300	F	6	86	90-260	220	18	1160
HP-400	C	13	290	190-610	315	26	1400
HP-400	F	6	100	108-320	315	26	1400
HP-500	C	13	320	230-700	400	33	1500

Note: Any change of HP Cone Crusher technical data shall not be advised additionally.

Category: Cone Crusher

TAGcone crusher , HP cone crusher , secondary crusher , tertiary crusher

HC Cone Crusher

kefidchina | July 14th, 2012

HC cone crusher is the new advanced cone crusher and win global stone crushing industry customers’ favor. It adopts advanced manufacturing technology and other latest researching results in crushing, hydraulic, computer control technology. HP cone crusher is widely used in the work of medium-size crushing, fine crushing and super fine crushing that can meet the toughest working conditions and has the characteristics of meeting the requirements of different types and hardness stones.

Working Principle:

1.Top and bottom body are alloy steel, which make the body more durable and robust through computer FEM finite element analysis design. Adopts alloy forged mainshaft, and can bear overweight crushing force.
2.The main axis, eccentric, eccentric bushing combined together. By rotating the eccentric can easily set multiple eccentricities, which can meet requirement of different minerals and mining.
3.Spiral bevel gear surface transmission makes it torque, efficiency.
According to the parietal broken principle and laminated material wear characteristic, the curve crushing chamber can ensure the large production, high quality, and low wear and tear cost of the crusher.
4.Lubrication system and hydraulic system adopt modular design, and they run independently. They chain with the host, enabling the protection of the oil temperature, flow, pressure, power, and abnormal power supply.
5.Self-operation system can achieve overload protection, over-iron protection and automatic compensation of liner wear during crushing operations. Feeding through crowded warehouse can maximize the effect of the crusher.

Technical Parameter :

Model	Main shaft speed(rpm)	Eccentric distance(mm)	Motor power(kw)	Weight(kg)
HC100S	360	16-25	90	7100
HC200S	340	16-30	150	13200
HC300S	285	20-36	220	19500
HC100	395	13-28	90	5400
HC200	360	16-36	150	9400
HC300	320	16-36	250	14500
HC400	290	18-50	315	24200

Model	Chamber Type		Max.feeding size(mm)	Capacityt/h:Capacity,Metric tons per hour
				CSS
				16	19	22	25	29	32	35	38	41	44	48	51	54
HC100S	EC		240		80	90	120	160	175	150	130
HC100S	C		200	68	75	102	133	117	102
HC200S	EC		360			122	131	180	243	258	325	343	360	320	269	225
HC200S	C		300		104	142	152	209	267	284	299	316	277	189
				25	29	32	35	38	41	44	48	51	54	57	60	64
HC300S	EC	450			248	264	350	371	468	493	630	550	479
HC300S	C	400		215	295	314	400	423	536	470	418	350
				4	5	6	8	10	13	16	19	22	25	29	32	35
HC100	EC	130						48	89	97	104	110	118	127	134	103
	C	90						56	93	101	108	116	124	110	74
	M	64					46	78	84	80	62
	MF	48				38	70	74	71	56
	F	38		35	51	52	56	60	50	40
EF available				6	8	10	13	16	19	22	25	29	32	35	38	41
HC200	EC	190					113	157	169	179	191	207	218	230	218	174
	C	145					138	149	160	170	182	196	207	197	156	120
	MC	115				60	147	158	170	182	193	168	152	123
	M	90				88	138	149	160	170	161	137	109
	MF	65			64	111	121	130	132	120	97
	F	50		82	87	92	101	108	110	100	81
EF available				10	13	16	19	22	25	29	32	35	38	41	44	48
HC300	EC	210				210	290	309	329	355	374	395	415	434	403	320
	C	170			106	229	307	327	348	377	397	378	352	276	240
	MC	140			128	275	296	316	336	363	344	322	254	221
	M	105			196	292	313	334	356	314	295	233	204
	MF	80		120	238	257	276	295	314	277	260	206
	F	65		185	201	216	232	248	263	233	218	172
EF available				13	16	19	22	25	29	32	35	38	41	44	48	51
HC400	EC	300			186	355	458	487	526	574	605	635	665	695	663	536
	C	210			200	385	504	535	579	611	643	675	643	538	426	371
	MC	170			266	447	478	508	549	580	610	524	488	382	303
	M	130			310	462	494	525	567	527	504	423	389
	MF	100		202	387	416	444	472	510	473	408	381
	F	75		319	344	370	395	420	454	421	363	339
	EF	55		295	318	313	304

EF = Extra fine
F = Fine
MF = Medium fine
MC= Medium coarse
M = Medium
C = Coarse
EC = Extra coarse
The capacity is based on granite, the density of aggregate is 1.6t/m3.
The technical data is only for reference, it is not considered as our guarantee. Please consult Kefid Machinery for more information.

Category: Cone Crusher

TAGcone crusher , cone crushers , HC cone crusher , new cone crusher

Spring Cone Crusher

kefidchina | July 14th, 2012

Spring cone crusher, compared with jaw crusher, has the advantage of low operation costs, high productivity, easy adjustment and stable structure. This types of cone Crusher can be used for secondary and fine crushing of hard and medium hard mineral stone, such as iron ore, copper ore, quartz, granite, basalt and dolerite, etc. The spring safety system of spring cone crusher serves as an overloading protection system that keeps cone crusher from metal damage. The dry oil and water sealing form of safety system is adopted to make plaster powder and engine oil separate to guarantee reliable performance.

Technical Parameter :

Mm to inch conversion: 25.4millimeters=1 inch

Type		Max. input (mm)	Adjusting range of output (mm)	Capacity (t/h)	Motor power (kW)	weight (t)	Overall dimensions (L×W×H)(mm)
PYB	900	115	15-50	50-90	55	10.2	3050×1640×2350
PYZ		60	5-20	20-65		10.2
PYD		40	3-13	15-50		10.3
PYB	1200	145	20-50	110-200	110	24.7	4152×2300×2980
PYZ		100	8-26	50-150		25
PYD		50	3-15	18-105		25.6
PYB	1750	215	25-60	280-480	160	50.3	4870×3800×4192
PYZ		185	10-30	115-320		50.3
PYD		85	5-15	75-230		50.4
PYB	2200	300	30-60	590-1000	260-280	80	7705×3430×4852
PYZ		230	10-30	200-580		80
PYD		100	5-15	120-340		81.4

Note: Any change of Cone Crusher technical data shall not be advised additionally.

Category: Cone Crusher

TAGcone crusher , cone crushers , hard stone crusher , Spring Cone Crusher

B Series VSI Crusher

kefidchina | July 14th, 2012

Kefid B series VSI crusher is newly researched equipment, with international advanced level. The VSI crusher is specifically for the production of high-quality gravel aggregate used in highway, railway, high-rise buildings, municipal, hydroelectric dam construction, and concrete mixing sand, and it is the first choice of the artificial sand making area and stone shaping area. It is applicable to the fine crushing techniques in the front of mining sector, and applicable to the material crushing of building materials, metallurgy, chemical, mining, refractories, cement, and abrasive industry. Besides, it also can be used in highly abrasive material and secondary disintegration crushing of it, and used in desulphurization in thermal power and metallurgy, and the environmental protection projects such as slag and construction waste crushing, and glass, quartz sand and other high purity materials crushing.

Technical Parameter :

Mm to inch conversion: 25.4millimeters=1 inch

Model		B-7611	B-8518	B-9526	B-1140
Capacity (t/h)	Center and Ring feeding	120-180	200-260	300-380	450-520
Capacity (t/h)	Center feeding	60-90	100-130	150-190	225-260
Max Feed Size (mm)	Soft material	<35	<40	<45	<50
Max Feed Size (mm)	Hard material	<30	<35	<40	<45
Rotation speed (r/min)		1700-1890	1520-1690	1360-1510	1180-1310
Power for double motor (kW)		110-150	180-220	264-320	400-440
Overall Dimension L×W×H (mm)		3700×2150×2100	4140×2280×2425	4560×2447×2778	5000×2700×3300
Weight (t)		7.8	10.3	16	25.6
Power Source		380v 50Hz
Vibrating Sensor		Inspect scope: 0.1-20mm/s adjusted continuously
Lubrication hydraulic pressure station	Power for double oil pump	2×0.31kW
	Safety	To make sure the supply of the oil with double oil pump; stop working without oil or hydraulic pressure; temperature falls when the water cools; start the motor by heating it in winter.
	Power for oil box heater	2 kW

Note: Any change of B series VSI crusher technical data shall not be advised additionally.

Category: VSI Crusher

TAGB Series VSI Crusher , sand making machine , stone maker , VSI crusher

Hydraulic Impact Crusher

kefidchina | July 14th, 2012

Kefid Hydraulic impact crusher is widely used in construction material making, highway and railway bulid, cement processing, mineral mining and chemical fields etc. It is designed to crush soft and medium hard rock. The size range of feed material (maximum compression strength 300Mpa, the moisture should be below 8-10%) can be up to 700mm. Hydraulic impact crusher improves the adjusting device making operation more convenient. The three– cavity makes excellent capability in fine crushing and super fine crushing line.

Technical Data:

P model	Spec.	Feeding size (mm)	Max. feeding size (mm)	Capacity (t/h)	Power (kW)	Weight (t)
PFS1210	Ф1150X960	570X990	250	70-120	90-110	15.0
PFS1214	Ф1150X1400	570X1430	250	90-170	132-160	19.0
PFS1315	Ф1300X1500	625X1530	300	180-270	160-200	25.0
PFS1318	Ф1300X1800	625X1830	300	220-300	200-250	30.0

If there is change of the above specification, it subjects to the newest products’ specifications.
Note: Any change of Hydraulic Impact Crusher technical data shall not be advised additionally.

Category: Impact Crusher

TAGHydraulic Impact Crusher , Impact crusher

Primary Impact Crusher

kefidchina | July 13th, 2012

PFP impact crushers are generally used as primary crushers for crushing quarry rock, which are designed for crushing low abrasive and medium hard materials. The materials fed to the crusher trough its large feeding opening are crushed in two stages while impacted by the rotor’s hammers to the adjustable primary and secondary impact plates.The materials will not pass to the secondary impact plate until being crushed and reduced to the size which the primary impact plate is adjusted to and will not pass to discharging chute until being crushed and reduced to the size which the secondary impact plate is adjusted to. By this adjustable impact plates the maximum size of output material can be controlled.

Technical Parameter :

P model	Spec.	Feeding size (mm)	Max. feeding size (mm)	Capacity (t/h)	Power (kW)	Weight (t)
PFP 1210	Ф1150X960	1100X1030	400	90-160	90-110	17.0
PFP 1214	Ф1150X1400	1100X1430	500	130-200	132-160	22.0
PFP 1315	Ф1300X1500	1200X1530	600	180-320	160-200	29.0
PFP 1318	Ф1300X1800	1200X1830	700	240-400	200-250	34.0

If there is change of the above specification, it subjects to the newest products’ specifications.

Note: Any change of Primary Impact Crusher technical data shall not be advised additionally.

Category: Impact Crusher

TAGImpact crusher , Primary Crusher , Primary Impact Crusher

Impact Crusher

kefidchina | July 13th, 2012

Kefid PF Series Impact Crusher uses the latest manufacturing technology and unique structure design; the final sizes share the advantages of cubic shapes, no tension and no cracks. This type crusher suitable to crush various coarse, medium and small materials (granite, limestone, concrete, etc.) with the feeding size less than 500mm, compressive strength less than 350MPa, which has been widely used in ore crushing, railway, highway, energy, cement, chemicals, construction and other industries, it can crush various ores and rocks, such as: limestone, cooked material, slag, coke and coal. The discharge opening can be adjusted under various specifications.

Features:

1. Larger input size, higher crushing cavity can process harder material with less powder in final products;
2. Easy adjustment of space between the impact plate and hammer, effective control of the final sizes with good cubic shapes;
3. Compact structure, good rigidity, the rotor offers larger inertia;
4. High chrome hammer offers larger impacting force with less abrasion on easy-wearing parts;
5. New type rotor increases impacting force;
6. Full breaking function, higher crushing ratio and productivity with lower energy consumption.
7. By using simple structure of expansion connection, it’s easy to get maintenance.

Technical Data:

Mm to inch conversion: 25.4millimeters=1 inch

Model	Size of rotor (mm)	Feed opening (mm)	Max. feed size (mm)	Capacity (t/h)	Power of Motor (kW)	Weight (t)
PF1010	Φ1000×1050	400×1080	350	50-80	75	12.5
PF1210	Φ1250×1050	400×1080	350	70-130	110	16.5
PF1214	Φ1250×1400	400×1430	350	90-180	132	19
PF1315	Φ1320×1500	860×1520	500	120-250	200	24
PF1320	Φ1320×2000	860×2030	500	160-350	260	27

Note: Any change of Impact Crusher technical data shall not be advised additionally.

Category: Impact Crusher

TAGImpact crusher , PF Impact Crusher , stone crusher

JC Series Jaw Crusher

kefidchina | July 13th, 2012

The JC series of European jaw crushers have been developed on basis of many years proven experience and can be used for secondary and fine crushing to process hard and abrasion mineral stones and rocks in metallurgy, mine, chemical, cement, building construction, fireproof material and ceramics industry. JC Series Jaw Crusher is ideal crusher to crush the mineral stone, rock and slag with compression resistance below 320Mpa.

Features:

1. World-level manufacturing technology is adopted, and highest-level raw material is used.

2. More advanced movable jaw assembly lengthens life of crusher.
Movable jaw assembly is made from cast piece with high-quality, is driven by two large flying wheels which are made from cast steel. Moreover, heavy eccentric shaft is processed by forged mold. These entire make the JC series jaw crusher extremely reliable.
3. Integral cast steel structure is adopted for bearing seat. Integral cast steel bearing matches well with the crusher frame, at the same time, radial strength of the bearing seat is highly strengthened.

4. Finite element analysis technology is adopted to make the crusher much stronger.

5. Crusher chamber adopts “V” structure which could make actual feed width comply with the nominal one.
6. Adjustment of the discharge part is more convenient.
The adjustment methods: gasket adjustment, hydraulic assistant adjustment, wedge block and wedge hydraulic adjustment.
7. Bearing with larger model and higher load are used.
All JC jaw crusher is equipped with larger bearing compared with same model of normal jaw crusher. Its higher load capacity and effective oil seal will lengthen the life of bearing.
8. A newly designed tooth-shape side plate, makes the available area of jaw plate longer, and enhances the capacity.

Technical Data:

Model		JC760×1100	JC840×1100	JC1100×1200	JC180×1300	JC250×1000	JC250×1300	JC400×600
Opening Size (mm)		760×1100	840×1100	1100×1200	180×1300	250×1000	250×1300	400×600
Max. Feed Size (mm)		620	720	930	150	220	220	350
Discharge Opening Range (mm)		75-200	100-225	150-275	10-30	20-40	70-100	35-85
Shaft Speed (r/min)		270	240	210	320	330	290	250
Capacity (t/h)		150-350	200-500	300-650	12-35	15-50	26-85	15-70
Motor	Power (kw)	110-132	132-160	185-200	30-37	30-37	37-45	37-45
Motor	Speed (r/min)	985	985	740	980	980	980	980
Dimension (mm)(L×W×H)		2600×2500 ×2200	3300×2320 ×3120	4140×2660 ×3560	1320×2150 ×1175	1400×1850 ×1310	1450×2150 ×1175	1920×1460 ×1840
Weight (kg)		24000	32000	59200	6000	5600	6800	7000

Note: Any change of European Type Jaw Crusher technical data shall not be advised additionally.

Category: Jaw crusher

TAGCE jaw crusher , jaw crusher , jc jaw crusher , stone crusher

Blog Archives

CS Cone Crusher

HP Cone Crusher

HC Cone Crusher

Spring Cone Crusher

B Series VSI Crusher

Hydraulic Impact Crusher

Primary Impact Crusher

Impact Crusher

Features:

Technical Data:

JC Series Jaw Crusher

Features:

Technical Data:

Machine News

Products Catalogue